79
HYDRAULIC UNIT
A
To adjust the implement lowering speed, use the 3-
point hitch lowering speed adjustment dial.
B
3-P. Quick Raise / Lower Switch
To avoid personal injury:
A
Before road traveling, be sure to set the
hydraulic control lever and the 3-point hitch
lowering lock lever to the "TRAVEL LOCK" and
"LOCK" positions, respectively.
A
Do not use the 3-P. Quick Raise / Lower switch
on road traveling.
A
When an implement is changed, do not use the
3-P. Quick Raise / Lower switch before
checking the full range of operation for
interference using the hydraulic control lever.
These switches are used to raise and lower the
implement. This facilitates turning in the field.
Press the "RAISE" switch, the 3-P. Lifting / Lowering
indicator turns on and the implement goes up. Press the
"LOWER" switch, the indicator goes off and the implement
comes down.
When the "RAISE" switch has been pressed to raise the
implement, the hydraulic control lever can not work.
To use the hydraulic control lever, first pull it up to the top
position.
1. 3-point hitch working range
Set the hydraulic control lever for a bottom limit and
the lift arm top limit adjustment dial for a top limit. The
3-P. Quick Raise / Lower switches are controls for the
raising and lowering within the limits set by the
hydraulic control lever and the lift arm top limit
adjustment dial.
2. One-touch floating function
Set the mode selector switch to the "DRAFT" position.
Hold down the "LOWER" switch to keep the 3-point
hitch floating. This function is helpful in plowing, for
example. Release the switch and the 3-point hitch
returns to the draft control position.
3. "RAISE" and "LOWER" operation with the 3-point
hitch going halfway
(1) When the "LOWER" switch is pressed with the 3-
point hitch going up halfway, the 3-point hitch
stops at this position. (The indicator turns on.) Re-
push the "RAISE" or "LOWER" switch, and the 3-
point hitch will go up or down respectively.
(2) To lower the 3-point hitch with the 3-point hitch
going up halfway, hold down the "LOWER" switch
for 2 seconds or push it twice.
(1) 3-point hitch lowering lock lever
(A) "LOCK"
(B) "UNLOCK"
3-P. Quick raise switch
3-P. Quick lower switch
(A) "PUSH"
(1) 3-P. Lifting / Lowering Indicator
Summary of Contents for M100GX
