(1) 4WD switch and Bi-speed
turn switch
(A) 4WD “ON”
(B) Bi-speed turn “ON”
(C) 2WD “ON”
(1) 4WD indicator
(2) Bi-speed turn indicator
NOTE :
• This switch can be operated when the tractor is
on the go or at rest without depressing the
clutch.
• Bi-speed turn system works when you press the
4WD and Bi-speed turn switch and the front tire
(inside of the turn) exceeds 35 degrees.
Bi-speed turn makes the front tire speed 1.6
times faster than the standard 4WD front tire
speed.
• Bi-speed turn operates only when the tractor
travel speed is 10 km/h (6.2 mph) or less at the
start of the turn.
19.1 Front-wheel drive and Bi-speed turn
usage
Front-wheel drive is effective for the following jobs:
• When greater pulling force is needed, such as
working in a wet field, when pulling a trailer, disking
or harrowing.
• When working in sandy soil.
• When working on a hard soil where a rotary tiller
might push the tractor forward.
• For increased braking at reduced speed.
Bi-speed turn
use is effective for the following jobs:
• Turning at the end of rows. (planting, cultivating,
harrowing.)
• Increasing maneuverability when working in tight
spaces.
IMPORTANT :
• Tires will wear quickly if the front-wheel drive is
engaged on paved roads.
20. Hand throttle lever
Pulling the throttle lever back decreases engine speed,
and pushing it forward increases engine speed.
(1) Hand throttle lever
“INCREASE”
“DECREASE”
21. Foot throttle
Use the foot throttle when traveling on the road. Press
down on it for higher speed. The foot throttle is
interlocked with the hand throttle lever; when using the
foot throttle, keep the hand throttle lever in low idling
position.
(1) Foot throttle
STOPPING THE TRACTOR
1. Slow down the engine.
2. Step on the clutch and brake pedal.
OPERATING THE TRACTOR
STARTING THE TRACTOR
60
M4N-071, M5N-091, M5N-111
Summary of Contents for M4N-071
