PERIODIC SERVICE
46
B
Checking Parking Brake
Pull the parking brake lever to apply the brakes. With the
key switch at "ON" position, the brake indicator on the
instrument panel lights up. To release the brakes, push in
the button at the tip of the parking brake lever and tilt down
the lever.
A
Make sure the brake indicator light on the Easy
Checker(TM) goes off when parking brake lever is
down.
B
Checking Gauges, Meter and Easy
Checker(TM)
1. Inspect the instrument panel for broken gauge(s),
meter(s) and Easy Checker(TM) lamps.
2. Replace if broken.
B
Checking Head Light, etc.
1. Inspect the lights for broken bulbs and lenses.
2. Replace if broken.
B
Checking Seat Belt and ROPS
1. Always check condition of seat belt and ROPS
attaching hardware before operating vehicle.
2. Replace if damaged.
B
Checking Joint Boot
1. Check to see if the joint boots are not damaged.
2. If the boots are cuts, cracked or shows signs of
deterioration, consult your local KUBOTA Dealer.
(1) Parking brake lever
(2) Release button
(A) "PULL"
(B) "RELEASE"
(1) Joint boot
(2) Front drive shaft
(3) Tie rod
(1) Joint boot
(2) Drive shaft
Summary of Contents for RTV500
