Kubota SSV65 Operator'S Manual Download

Page: 12 / 125

SAFE OPERATION

11.Do not allow anyone to use the machine until they

have been informed of the work to be performed and
they have read and understood the operator's manual.

12.Do not wear baggy, torn or oversized clothing when

working with the machine as such clothing can get
caught in rotating parts or control elements which can
cause accidents or injuries. Wear adequate safety
clothing, e.g. safety helmet, safety shoes, eye
protection, ear protection, working gloves, etc, as
necessary and as prescribed by law or statutes.
If exposed to loud noise for long hours, you may suffer
from hearing difficulty or loss. To protect your ears
from unpleasant, loud noise, wear ear muffs, ear plugs
or other protective ear pieces, as required.

13.Do not allow passengers to ride on any part of the

machine at any time. The operator must remain in the
machine seat during operation.

14.Check the levers, pedal and mechanical parts for

correct adjustments and wear. Replace worn or
damaged parts immediately. Check the nuts and bolts
regularly for correct torque.

15.Keep your machine clean. Heavy soiling, grease, dust

and grass can cause fires, accidents or injuries.

16.Before starting the machine, be absolutely sure that

the machine has been filled with fuel, lubricated,
greased and undergone all necessary maintenance.

17.Do not modify the machine, otherwise it could lead to

unforeseen safety problems.

18.Make sure attachments, particularly those utilizing the

quick-hitch, are securely mounted. Use only KUBOTA
authorized attachments.

1. Mount and dismount the machine safely. Always face

the machine. Always use handrails and available
steps at least three points and keep yourself well
balanced. Do not grab or hold any of the control levers,
pedal or switches. Do not jump on or off the machine,
whether stationary or in motion.

2. Before starting the job, run the machine for all

movements in a large space and make sure the
machine functions well in every action.

3. Start and control the machine only from the operator's

seat. The operator should not lean out of his/her seat
when the engine is running.

4. Before starting the engine, make sure that the

armrests are in the "Raised" position, the control
levers are in their neutral position and the seat belt is
fastened correctly.

5. Always thoroughly check the surrounding area for any

possible conditions that could create a dangerous
situation.

Make sure you read the operator's manual to
thoroughly understand the operating conditions
and limitations of the machine.

To avoid damage and to prevent accidents, always
use the buddy system and have the other person,
check for clearances and other possible dangers
that may be obstructed from view.

Never allow people to approach the vicinity of the
turning radius of the machine.

Be cognizant of blind spots to the rear and always
check behind you before backing up.

6. Only operate the machine in a well-ventilated area to

avoid poisoning from carbon monoxide, an odorless,
colorless gas that is deadly.

2. OPERATING THE MACHINE