6
ENGLISH
B
Fitting the Mower Linkage 2
1. Attach the lift link (9) to the right and left links (1 and 2)
and the lift arm with the two joint pins (5 and 6), three
plain washers (7) and two split pins (8).
2. Attach the lift spring (10) and lift spring rod assembly
(11), each for right and left.
3. Mount the cover (12) to the lift link (9) by joint pins (13),
plain washers (7) and split pins (8).
B
Securing the Seat
C
Fitting the seat
1. Connect the wire harness (2) to the OPC switch
behind the seat (1).
2. Put the four plastic collars (3) in between the seat (1)
and seat base (4). Apply the four bolts (5) in place.
A
Use the plastic collars (3) and the bolts (5) assembled
to the seat.
3. Connect the seat wire harness (2) to the main wire
harness (6) of the machine.
4. Mount the center fender cover (7) to the fender with
two M14 bolts (8) and two plain washers (9).
L) LEFT HAND: 70 mm
RIGHT HAND: 50 mm
