PERIODIC SERVICE
44
B
Replacing Air Cleaner Element (Z121S,
Z125S)
Every 100 hours of operation
or
annually
replace the
paper element.
[Z121S, Z125S]
1. Unlatch the cover and remove the air cleaner cover.
2. Remove the air cleaner element and precleaner.
3. Remove the precleaner from the paper element.
4. Replace a dirty, bent, or damaged element with a
genuine part. Handle the new element carefully; do not
use if the sealing surfaces are bent or damaged.
5. Clean the air cleaner base as required and check
condition.
6. Reinstall the precleaner over the paper element and
install in air intake.
7. Reinstall the air cleaner cover and secure with the 2
latches.
A
Operating the engine with loose or damaged air
cleaner components could allow unfiltered air into the
engine causing premature wear and failure.
B
Cleaning Engine Shroud
To avoid serious injury:
A
Make sure engine is cool to the touch before
removing shrouds.
1. Remove the engine shroud mounting bolts and detach
the shroud.
2. Check to see if the engine's cooling fins are blocked
with dust and dirt. Clean them with compressed air if
required.
To avoid serious injury:
A
Always shield eyes and face from air deposits
and objects.
[Z122E]
(1) Air cleaner cover
(A) "UNLATCH"
(B) "REMOVE"
(1) Air cleaner cover
(2) Air cleaner element
(3) Precleaner
(A) Air intake
(1) Shroud
Summary of Contents for Z121S-AU
Page 7: ......
Page 12: ... 5 SAFE OPERATION 5 DANGER WARNING AND CAUTION LABELS ...
Page 13: ...SAFE OPERATION 6 ...
Page 14: ... 7 SAFE OPERATION ...