SAFE OPERATION
Careful operation is your best insurance against an
accident.
Read and understand this manual carefully before
operating the machine. All operators, no matter how
much experience they may have had, must read this
and other related manuals before operating the
machine or any implement attached to it. It is the
owner's obligation to instruct all operators in safe
operation.
If the operator(s) or mechanic(s) cannot understand the
contents, it is the owner's responsibility to explain this
material to them. This mowing machine is capable of
amputating hands, feet and throwing objects. Failure to
observe the following safety instructions could result in
serious injury or death.
BEFORE OPERATING THE
MACHINE
Know your equipment and its limitations. Read all
instructions in this manual before attempting to start
and operate the machine.
1. General
• The zero turn mowing machine has different
steering characteristics than other machines with a
steering wheel and does not have a service brake
pedal. Normal slowing down and stopping is done
with the motion control levers. Read and
understand the operator's manual before operating
the machine. Practice operating the machine at low
engine speed in an unobstructed area without
engaging the mower.
• Pay special attention to the safety labels on the
machine itself.
• Do not allow any bystanders around or near the
machine during operation.
• Do not allow passengers, children or non-qualified
operators on the machine at any time. The operator
must remain in the machine seat throughout
operation.
• Do not operate the machine or any attachments
while under the influence of alcohol, medication,
controlled substances or when fatigued.
• Do not wear loose, torn, or bulky clothing around
the machine. The clothing may catch on moving
parts or controls, leading to the risk of an accident.
Wear and use any additional safety items such as a
hard hat, safety boots or shoes, eye and hearing
protection, gloves and so on, as appropriate or
required.
• Do not wear radio or music headphones while
operating the machine. Do not operate the machine
or any attachments while using or texting with a
cellphone or any other electronic device.
Safe operation requires your full attention.
• Carefully check the vicinity before operating
machine or any implement attached to it. Clear the
work area of objects (such as wires and rocks,) that
might be picked up and thrown. Check for overhead
clearance which may interfere with the grass
catcher or ROPS.
• Check brakes and other mechanical parts for
correct adjustment and wear. Replace worn or
damaged parts promptly. Check the tightness of all
nuts and bolts regularly.
(See
and
• Keep all shields and guards in place. Replace any
that are damaged or missing. Do not operate
unless they are functioning properly.
• Before allowing other people to use your machine,
explain how to operate and have them read this
manual before operation.
• In addition to the design and configuration of
equipment, hazard control and accident prevention
are dependent upon the awareness, concern and
prudence of personnel involved in the operation,
transport and maintenance of the equipment.
• Keep the machine and attachments in good
operating condition and keep safety devices in
place and in proper working condition. Do not
operate unless they are functioning properly.
• Do not modify the machine. Unauthorized
modification may affect the function of the machine,
which may result in personal injury.
• Use only implements approved by KUBOTA. Use
proper ballast on the front or rear of the machine to
reduce the risk of upsets. Follow the safe operating
procedures specified in the manuals of the
equipment.
• Keep your machine clean. Accumulations of dirt,
grease, and trash can contribute to fires and lead to
personal injury.
• The exhaust gas from the muffler is very hot. To
prevent fire, do not expose dry grass, mowed
grass, oil and any other combustible materials to
the exhaust gas. Use a spark arrester where
required. Keep the engine and muffler clean all the
times.
SAFE OPERATION
Z400
5
Summary of Contents for Z411
