MOWER MOUNTING
MOUNTING THE MOWER DECK
WARNING
To avoid serious injury or death:
• Park the machine on a firm and level surface.
• Apply the parking brake.
• Stop the engine and remove the key.
• Fix mower link at 25.4 mm (1 in.) position.
1. Before mounting the mower deck, raise the lift links
to the full up position.
2. Adjust the cutting height control dial to 1 in.
position.
3. Adjust the anti-scalp rollers to 25.4 mm (1 in.)
position.
(See ADJUSTING THE CUTTING HEIGHT on page
46.)
4. Go backward so that right and left front tires would
be on the board 38.1 mm (1.5 in.) high.
(H) 38.1 mm (1.5 in.)
(W) 133 mm (5.25 in.)
IMPORTANT :
• Use a board more than 133 mm (5.25 in.)
wide and 1600 mm (63.0 in.) long.
• Make sure that right and left front tires are
firm on the board.
5. Make sure the direction of the front tires is as
shown in the figure.
(H) 38.1 mm (1.5 in.)
(L) 1600 mm (63.0 in.)
(W) 133 mm (5.25 in.)
6. Place the mower deck at the right side of the
machine.
7. Slide the mower deck under the machine, then
lower mower lift links.
MOWER MOUNTING
MOUNTING THE MOWER DECK
24
Z751KWi,Z781KWi,Z781KWTi
Summary of Contents for Z751KWi
