3.1 Normal mode
The hour meter gives readings for the hours the
machine has been operated.
The hour meter indicates in 5 digits the hours the
tractor has been used; the last digit indicates 1/10 of an
hour.
IMPORTANT :
• If the key is on but engine not running, the
hours are not counted by the hour meter.
• The hour meter only counts the hours if the
engine is running.
3.2 Error code mode
This mode displays error codes for the LCD monitor.
For example, if the machine's hour meter displays 88.0
and the hour meter has some trouble with its internal
memory, the display will change between
and
. To get help, contact your local KUBOTA
Dealer when these codes appear.
For some error codes, the engine will enter a reduced
power mode to minimize or prevent engine damage.
(Refer to Kawasaki engine operator's manual for more
details.) The PTO will automatically disengage, and the
engine will automatically reduce throttle to low idle.
Park the machine and stop the engine as soon as
safely possible and contact your local KUBOTA Dealer.
(1) Hour meter
(2) Hour meter error code
(A) The display change
3.3 Service code mode
The engine and/or transmission must be serviced every
100 hours. So between 95 and 105 hours, this display
will show the maintenance reminder code whenever the
key is turned
“ON”
. It will show the code for the first 10
seconds that the key is
“ON”
. For example, if you turn
the key
“ON”
and the machine has 96.0 hours, it will
show
for 10 seconds. After 10 seconds, it will
show
.
The
code means you need to change the
engine oil. Also, the maintenance warning lamp will be
“ON”
constantly between 95 and 105 hours so you will
not forget about the service code.
Service item
display
Change en-
gine oil
Change en-
gine oil filter
Change HST
oil and filter
“SEr 1”
●
“SEr 2”
●
●
“SEr 3”
●
●
“SEr 4”
●
●
●
(1) Service code
(A) The display change
3.4 Resetting
In case you changed the oil at 98 hours, you can reset
the maintenance reminder.
OPERATING THE ENGINE
LCD MONITOR
32
Z751KWi,Z781KWi,Z781KWTi
Summary of Contents for Z751KWi
