• Do not drop the seat when lowering it.
• Watch your hands. Do not place your hands
under the seat when lowering it.
1. Lower the seat slowly to lock.
DAILY CHECK
To prevent trouble from occurring, it is important to
know the condition of the machine. Check it before
starting.
WARNING
To avoid serious injury or death:
• Be sure to check and service the machine on a
level surface with the engine shut off, the key
removed and the parking brake securely set or
the rear wheels chocked.
No.
Check item
Ref.
page
Walking around
the machine
1
Damage to machine body,
tightness of all bolts, nuts,
pins, and so on.
-
2
Fuel and oil leak
-
3
Tire pressure, wear and
damage
50
60
4
Engine oil level
57
5
Fuel level
58
6
Transaxle fluid level
59
7
Machine body cleaning
-
8
Clean area around muffler,
engine and cutting height
cam.
-
9
Clean area around safety
switches
61
Mower
1
Check all hardware.
-
2
Make sure all pins are in
place.
-
3
Mower deck cleaning
-
4
Make sure blade bolts are
tight.
78
5
Blades and belt wear or
damage
78
While sitting in
the operator's
seat
1
Motion control lever
-
2
Parking brake
-
3
Dial cam rotation force
60
4
Other movable parts
61
Turning the key
switch
“ON”
1
Performance of the Easy
Checker
™
light
30
(Continued)
No.
Check item
Ref.
page
Starting the en-
gine
1
Color of the exhaust fumes
-
2
Check for abnormal noise
and vibration.
-
3
Engine start system/OPC
system. If either of these do
not operate properly, contact
your local KUBOTA Dealer
immediately.
61
62
Others
1
Check the areas where pre-
vious trouble was experi-
enced.
-
1. Checking the engine oil level
WARNING
To avoid serious injury or death:
• Always stop the engine and remove the key
before checking the oil.
1. Check the engine oil before starting and 5 minutes
or more after the engine has stopped.
2. Wipe the dipstick area clean.
3. To check the oil level, remove the dipstick and wipe
it clean. Reinsert the dipstick into the tube, rest the
cap on the tube and do not thread the cap onto the
tube. Remove the dipstick again. Check to see that
the oil level is between the 2 notches.
4. Add new oil to the prescribed level at the oil port if
necessary.
(1) Engine oil port
(2) Oil level dipstick
(A) “UPPER LEVEL”
(B) “LOWER LEVEL”
IMPORTANT :
• When using a different brand or viscosity oil
from the previous one, remove all of the old
oil and the oil filter. Never mix 2 different
types of oil.
• Use the proper SAE engine oil according to
the ambient temperature.
(See LUBRICANTS AND FUEL on page 55.)
DAILY CHECK
PERIODIC SERVICE
Z751KWi,Z781KWi,Z781KWTi
57
Summary of Contents for Z751KWi
