PERIODIC SERVICE
42
HOW TO TILT UP THE MACHINE
To avoid personal injury or death:
A
Park the machine on a firm and level surface.
A
Set the mower deck height to 5 inch.
A
Stop the engine, remove the key and engage
the parking brake.
A
Be sure to chock the wheels.
A
Lock the raised axle with an L-pin and Hairpin
cotter before working under the machine.
1. Lower the forward right anti-scalp roller to the lowest
position.
[RCK72, RCK60 only]
2. Fully open the front cover.
3. Unfold the tilt lever.
4. Keep the front cover opened.
5. Remove two L-lips.
6. Insert L-pins to both sides of the front axle to position
the front wheels. As shown below.
7. Turn the tilt lever clockwise to raise the axle to the
stop.
8. Remove the L-pin of the raised wheel and insert it to
the outside hole of the frame.
9. Insert the hairpin cotter.
(1) Front cover
(2) Tilt lever
(1) L-pin
(2) Tilt lever
(1) L-pin
(2) Hairpin cotter
