9
MOWER MOUNTING
ENGLISH
10. After mounting the mower, check the mower level. If
necessary, adjust the mower level and anti-scalp
rollers.
ADJUSTING THE MOWER
See "OPERATING THE MOWER" and "ADJUSTMENT"
section.
DISMOUNTING THE MOWER DECK
For dismounting the mower deck, reverse the above
procedures.
INSTALLING PARTS TO THE MOWER
B
Installation of Skid
[RCK60R, RCK72R]
Install the skid with 5 flange bolts.
A
Right side shown, left side similar
B
Installation of Gauge Wheel
[RCK60P, RCK72P]
Install the gauge wheel to the stay (3L gauge) with gauge
wheel boss, sems bolt and locking nut.
A
Choose the hole of the stay (3L gauge) by cutting
height.
(See "ADJUSTING CUTTING HEIGHT" in
"OPERATING THE MOWER" section.)
A
Left side of RCK72P shown, right side of RCK72P and
left side of RCK60P similar
A
Install the sems bolt from outside.
[RCK60R, RCK72R]
Install the gauge wheel with gauge wheel boss, plain
washer, sems bolt and locking nut.
A
Choose the hole of the skid by cutting height.
(See "ADJUSTING CUTTING HEIGHT" in
"OPERATING THE MOWER" section.)
A
Left side of RCK72R shown, right side of RCK72R and
both side of RCK60R similar
A
Install the sems bolt from inside.
(1) Universal joint
(2) Coupler
(A) "PULL"
(1) Skid (RH)
(2) Flange bolt (M10)
(1) Gauge wheel
(2) Stay (3L gauge)
(3) Sems bolt
(4) Gauge wheel boss
(5) Locking nut