47
PERIODIC SERVICE
ENGLISH
B
Checking Gear Box Oil Level
To avoid personal injury:
A
Always stop the engine and remove the key
before checking oil.
1. Park the machine on a flat surface and lower the
mower to the ground.
To check the oil level, loosen check plug bolt and
check to see that the oil level is just below the check
plug port.
If the level is too low, add new oil to the prescribed
level at the oil inlet.
(See "LUBRICANTS AND FUEL" in "MAINTENANCE"
section.)
B
Lubricating Grease Fittings
To avoid personal injury:
A
Be sure to stop the engine and remove the key
before greasing.
Apply a small amount of multipurpose grease to the
following points every 50 hours:
If you operated the machine in extremely wet and muddy
conditions, lubricate grease fittings more often.
(1) Drain plug (Bolt)
(2) Check plug (Bolt)
(3) Oil filler plug
(1) Front axle (LH, RH)
(2) Front wheel (LH, RH)
(1) Parking brake lock pedal
Summary of Contents for ZD221
