MOWER MOUNTING
10
ENGLISH
9. Install universal joint.
Pull back the coupler of the universal joint.
Push the universal joint onto the PTO shaft until the
coupler locks.
Extend the universal joint cover to the coupler of the
universal joint.
A
Tug the universal joint backward and forward to make
sure it is locked securely.
10.Raise the operator's seat to the "LOCK" position.
11.Set the hook of the chain to the hole of the stay.
12.After mounting the mower, check the mower level. If
necessary, adjust the mower level and anti-scalp
rollers.
ADJUSTING THE MOWER
See "OPERATING THE MOWER" and "ADJUSTMENT"
section.
DISMOUNTING THE MOWER DECK
For dismounting the mower deck, reverse the above
procedures.
(1) Lift link
(2) Clevis pin, Plain washer, Snap ring
(1) Universal joint
(2) Coupler
(3) Universal joint cover
(A) "PULL"
(1) Chain
(2) Hook
(3) Hole of the stay
Summary of Contents for ZD326
