51
PERIODIC SERVICE
ENGLISH
B
Checking OPC System
The OPC (Operator Presence Control) system in your
machine are designed to protect you while operating.
Please check these OPC system periodically. It is
recommended to check the OPC system before daily
operation.
To avoid serious injury or death:
A
Do not allow anyone near the machine while
testing.
A
If the machine does not pass one of the
following tests, do not operate the machine.
See your local KUBOTA Dealer.
A
Sit on operator's seat for all tests.
A
Check the following tests before operating the
machine.
Test 1
(OPERATOR ON THE SEAT)
1. Start the engine.
2. Do not set the parking brake.
3. Shift the PTO lever to "DISENGAGE" (OFF) position.
4. Grasp the motion control levers and move them
inward from "NEUTRAL LOCK" position to
"NEUTRAL" position and then release the levers.
5. Stand up. (Do not get off the machine.)
6. The engine must shut off.
Test 2
(OPERATOR ON THE SEAT)
1. Start the engine.
2. Do not set the parking brake.
3. Shift the PTO lever to "ENGAGE" (ON) position.
4. Stand up. (Do not get off the machine.)
5. The engine must shut off.
A
If the engine cranks Test 1 or 2, consult your local
KUBOTA Dealer to have the unit checked before
operation.
(1) Parking brake lock pedal
(2) Motion control lever
(3) Key switch
(4) PTO lever
Summary of Contents for ZD326
