K U B U W T X - 1 0 U S E R M A N U A L
2
Introduction
The Kubu WTX-10 Wireless Audio Transmitter transports an externally provided audio signal over an 802.11n
wireless network for eventual reception and playback by 802.11n devices equipped with the capability to do so.
The Kubu WTX-10 operates as an 802.11n dedicated access point which these devices can connect to. The
operation of these receiving devices and/or software is outside the scope of this manual. This manual only
covers the installation and operation of the WTX-10 device.
Package Contents
The Kubu WTX-10 package contains the following items.
Kubu WTX-10 Wireless Transmitter (1)
A/C Power Adapter (1)
Antenna (1)
Audio cable (1)
User Manual (1)
Installation
Follow the steps below to install the Kubu WTX-10.
Connect the antenna included with the WTX-10 to the antenna connector on the back panel. The
antenna screws into the connector.
Place the WTX-10 near the audio source you intend to use.
Connect the output of the audio source to the audio input on the back panel of the WTX-10 using the
included audio cable.
Plug the included A/C power adapter into a standard 110v A/C power outlet and connect it to the power
input jack on the back panel of the WTX-10.
