background image

5

AFTER SALES SUPPORT

1300 886 649

info@tempo.org

AUS

MODEL: GTM-8216   PRODUCT CODE: 48279    12/2014

General Safety Instructions

Read this manual thoroughly before first use, even if you are familiar with this 
type of product. The safety precautions enclosed herein reduce the risk of fire, 
electric shock and injury when correctly adhered to. 
Keep the manual in a safe place for future reference, along with the 
completed warranty card, purchase receipt and carton. If applicable, pass these 
instructions on to the next owner of the appliance.
Always follow basic safety precautions and accident prevention measures when 
using an electrical appliance, including the following: 

 Electrical safety and cord handling 

•  Voltage: Before connecting the power cord, make sure that your outlet 

voltage and circuit frequency correspond to the voltage stated on the 
appliance rating label.

•  Water: To protect against electric shock, never operate this product with wet 

hands. Never submerge the product, its cord or plug in water or other liquids. 

•  Power Cord: Do not kink, bend, squash or damage the power cord, and 

protect it from sharp edges and heat. Do not let it hang over the edge of a 
table or benchtop, or touch hot surfaces. Do not put any stress on the power 
cord where it connects to the product, as the power cord could fray and break.

•  No extension cord: Do not use an extension cord. Insert the plug directly into 

an electrical outlet.

•  Assembly: Do not plug the appliance into the power supply until it is fully 

assembled. Always unplug the appliance before disassembling it or handling 
the blade.

•  Disconnect: Switch off the appliance and disconnect the plug from the power 

supply before cleaning the appliance, before putting on or taking off parts and 
when it is not in use. Grip by the plug, do not pull by the cord.

•  Damage: Do not pick up or operate the appliance if the power supply cord, 

plug or housing is damaged, or after it malfunctions or has been damaged. 
A damaged cord or plug must be replaced by the manufacturer or a qualified 
person in order to avoid a hazard. 

In case of damage, call our after sales 

support line for advice.

•  RCD: Unless your home is already fitted with a residual current device (safety 

switch), we recommend installing an RCD with a rated residual operating 
current not exceeding 30mA to provide additional safety protection when 
using electrical appliances. See your electrician for professional advice.

Summary of Contents for GTM-8216

























Reviews: