Kudo3D Bean User Manual
Ver. 1.0
10 of 14
Import solid .stl file to Meshmixer.
Press the “Edit” button on the left toolbar
and select “Hollow” in the list.
“Offset Distance” is the wall thickness.
Both “Solid Accuracy” and “Mesh Density”
determines how precisely you want to
hollow. The more precise the larger the
exported file. If the hollowing is too rough,
the wall may be too thin in certain area to
print.
You can chanage the hollowing
parameters and press “Update Hollow”.
To aoid a huge vacuum force during
printing, the model
MUST
have vent holes.
After pressing “Generate Holes”, you can
move the red dots to where you want the
holes to be opened. It is better to open
holes at the bottom or at a spot that is hard
to see.The hole radius must be greater
than 2mm.
Once the hollowing and hole generating
are set, press “Accept” to finalize.
Please note that hollowing may introduce
horizontal lines for printed models with
abrupt changes of shrinkage in the model
structure.
