Kudo3D Bean User Manual
Ver. 1.0
4 of 14
WARNING
Bean should be operated in a clean open area with air circulation at a temperature about 25 degree
Celsius to prevent overheating.
Do not clean the acrylic cover with IPA
The back of Bean should be at least 5cm sway from the wall
Do not touch the LCD panel directly with your fingers. LCD is extremely sensitive to the electrostatic
discharge.
You may consider using thin black tape to seal the gap between the LCD and the rim of the opening to
prevent dripped resin entering the gap.
When moving the linear stage down, the platform must be attached. The carrier is tightened to prevent
horizontal swinging so it needs the weight of the platform to move down smoothly.
Must use dry lubricant to lubricate the linear screw and guide
CE/FCC Notice
For EN 55022: 2010 warning: This is a class A product. In a domestic environment this product may
cause radio interference in which case the user may be required to take adequate measures.
For EN 55032: 2012 warning: This equipment is compliant with Class A of CISPR 32. In a residential
environment this equipment may cause radio interference.
For EN 55032: 2015 warning: Operation of this equipment in a residential environment could cause radio
interference.
