FIT COVER CAPS
20
SILICONE SEAL ENCLOSURE
21
Push fit square cover cap into bottom outer clamp.
Push fit cover cap into wallpost and secure using no.4 x13mm
long csk screw provided.
Repeat for other wallpost.
IMPORTANT: the wallpost cover caps feature integral locking tabs for safety reasons - failure to fit these cover caps will
invalidate the guarantee.
OUTSIDE Enclosure
Silicone seal wallposts to walls and over full width of enclosure
to showertray at bottom.
Detail A
Seal up juncture of rail end to glass. Seal up corner bracket
assembly to glass and bottom rail.
INSIDE Enclosure
Detail B
Silicone seal wallposts to walls. and glass panels to tray ONLY.
DO NOT seal bottom of wallposts or rail to tray.
OUTSIDE - Detail A
INSIDE - Detail B
Allow 24hrs for silicone to fully cure before using the enclosure.
no.4 x 13mm long
csk screw
wallpost
cover cap
square
cover cap
DOOR WALLPOST
SIDE PANEL WALLPOST
DO NOT apply
silicone here
on the inside
When installed correctly,
under normal showering use, ie. when the shower head is
in it’s normal showering position.
NB - Using the shower head to clean/rinse down the enclosure
does not constitute normal showering use.
Kudos guarantee the enclosure will not
leak
