//
ORIGINAL OPERATING INSTRUCTIONS
Maintenance
27.06.2018
71/79
10.5 Safety
During cleaning and maintenance work, please pay attention to the following:
•
Make sure that all hydraulic lines are depressurised.
•
Switch off the motor of the carrier vehicle and remove the ignition key.
•
Disconnect the hydraulic and electrical connection to the carrier vehicle.
•
Make sure that the sweeping suction combination as well as the carrier vehicle
are placed on even, solid and stable ground.
•
Never use components of the sweeping suction combination as climbing aid.
•
When tightening screw connections, always use the prescribed tightening torques
(see Chapter
15. "Tightening torques ", page 77
).
•
Please observe the safety instructions for maintenance (see Chapter