Instructions for work
Mower conditioner
FC3160TCD-3560TCD-4060TCD
51
KN284BGB A
2. Adjustments in working position
Cutting height
The height can be adjusted from 25 to
85 mm (1"/3.3"). Centralized adjustment by means of a
pitch angle adjustment rod fitted with a graduated
scale (1).
To adjust the cutting height:
- Lift lock (2).
- Turn clockwise to reduce cutting height (a).
- Turn counter-clockwise to increase the cutting
height (b).
- Lower lock (2).
Before making any adjustment:
- Check that nobody is within the machine
pivoting area.
- If there is someone, make sure the
person moves away.
- Wait until the rotating parts have come
to a complete stop.
Place the machine on flat ground.
The cutting height is adjusted with the
machine attached, hitch pins at 650 mm (26’’)
from the ground.
Cutting height is always adjusted before
adjusting the ground pressure.
2
1
