Machine specifications
Mounted field sprayers
OMNIS
37
Operating principle
Pump (10) sucks up the liquid through suction filter (11). The valve lever position indicates the origine of the
liquid sucked by the pump:
-
- Suction valve (13):
• External suction.
• Main tank suction.
-
- Rinsing tank valve (12) (optional):
• Outer filling.
• Rinsing tank suction.
The pump supplies liquid to all spraying sections:
-
- BY-PASS valve (4) protects the overpressure circuit.
- Product incorporator lever (6) (optional).
- Discharge valve (7): The valve lever position indicates the destination of the liquid that has flown back from
the pump:
• Outer discharge.
• Booms.
Flow regulation valve (3) adjusts the boom flow by means of returning part of the liquid to the tank. The larger
the flow regulation valve opening, the higher the return to tank. The smaller the flow regulation valve opening,
the lower the return to the tank.
When optional equipment is used, follow
specific procedures mentioned in the related
section:
- Tank gyrocleaner.
Summary of Contents for Omnis 1000
