3
Mounting variants (continued)
13 of 26
Ro/Me/03/23 03.99.02 en
1
2
3
4
5
Fig. 6 Levelling compound
(7) Set down the robot in the still plastic levelling compound and adjust its position slightly
if necessary.
The robot can be levelled by turning an M20x40 hexagon bolt (Fig. 4/4) on each
intermediate plate.
(8) Allow the levelling compound to set for about three hours.
(9) Drill four anchor holes (Fig. 7/8) for each intermediate plate; minimum depth in concrete
160 mm.
The holes in the concrete foundation must be drilled through the holes (5) in the
plates (6).
1
8
2
3
4
5
6
7
160
ø30
250
Fig. 7 Anchor boreholes for variant 2
(10) Insert anchors (7).