6. Cleaning process for all other dima Print materials
1. Remove the building platform from cara Print 4.0
2. Attach the building platform to the hanger
(choose the
small
or
extended
hanger according to the size of objects!)
3. Carefully blow with compressed air
4. Pre-rinse with isopropanol
5. Cleaning cycle 1 (3 min.)
6. Carefully blow with compressed air, leave on building platform and
move to second cara Print Clean with fresh isopropanol
7. Cleaning cycle 2 (2 min.)
8. Blow dry
9. Remove objects from building platform and proceed with the recommended post-curing
11
