4. Cleaning process for dima Print Stone (model material)
4.1. Manual pre-cleaning
After your objects are successfully printed, remove
the building platform from the printer and let any extra
material drain off onto a paper towel or similar.
Carefully remove any extra monomer using compressed
air. This optimizes the cleaning process and reduces the
amount of isopropanol that you will need.
Next, carefully rinse the printed object and the building
platform with isopropanol using a squirt bottle.
SAFETY WARNING:
ALWAYS USE PROTECTIVE NITRILE GLOVES, PROTECTIVE EYEWEAR AND APPROPRIATE PROTECTIVE
CLOTHING WHEN WORKING WITH MONOMERIC LIQUIDS AND ISOPROPANOL. DO NOT INHALE THE
VAPORS AND AVOID SKIN CONTACT.
!
7
