Kulzer HiLite power 3D, Operating Instructions Manual

Operating instructions 

HiLite

®

 power 3D

- 3 -

GB

DE

GB

FR

ES

IT

PT

NL

SE

DK

NO

FI

GR

2.3 

Operator‘s obligations

In addition to complying with the statutory regulations specified by the manufacturer, the operator must ensure the statutory 
obligations are observed and implemented in the workplace, i.e. he must train his personnel and comply with industrial safety 
legislation and any other regulations or laws in force.

For working on and with the device, the operator must draw up written instructions in understandable form and give these to  
his employees in their own language. These instructions must be based on the operating manual and written in light of the work  
to be performed.

2.4 

Unit diary / Operating manual

We recommend that you keep a “device diary” and document all tests, and major work (e.g. servicing, changes) in it. Keep this 
operating manual in a safe place so that you can consult it whenever you need safety instructions and important user information.

2.5 

Safety instructions

The safety instructions for personal safety, the surroundings, and the goods being deviced depend heavily on the behaviour  
of the people using the device. 

Before putting the device into operation, read the operating manual carefully and follow the instructions to avoid errors and  
damage, especially damage to your health. 

In addition to the instructions in this operating manual, comply with the national laws, regulations, and directives in your country 
when setting up and operating the device.

ELECTRIC SHOCK

  Before using the device, check the mains lead and plug for damage.
  If they are damaged, do not connect the device to the mains.

Works at the electrical equipment of the unit may only be performed by 

adequately trained service companies 

and in the safe 

condition (voltage cleared).

Only permissible original spare parts must be used.  
The use of different parts holds unknown risks and must be avoided at any rate.

Proper function and safety of the unit are only guaranteed if the required tests, maintenance and repair work have been  
performed by 

Kulzer service agents 

or by 

personnel adequately trained 

by the manufacturer.

Kulzer GmbH will 

not accept 

any liability for damage to the unit resulting from inexpert repair which has not been performed by 

Kulzer service agents 

or if no original spare parts / accessory parts have been used during the exchange of these parts.

3 

Intended use

The light polymerisation device HiLite

®

 power 3D is used to cure light-curing, dental materials in the dental laboratory as well as 

post curing process of 3D-printed objects, made out of photosensive liquids / resins for exclusively dental medical purpose.

The light polymerisation device HiLite

®

 power 3D is manufactured using state-of-the-art technology and is safe to operate. 

However, the device can be dangerous if it is not operated by adequately trained personnel, or used incorrectly or contrary to the 
intended use.

The device must be operated by dental-laboratory technicians or assistants who:

have acquired their skills through technical training or instruction,

are qualified to perform their duties correctly,

can detect possible dangers when working with the unit.

CAUTION

  If particular problems not described in detail in this operating manual arise, please contact the supplier to ensure  

your own safety.

3.1 

Working rules

CAUTION

  Remove any jewellery and put on the necessary personal safety clothing, e.g. hand, face, and body protective clothing.