INSTALLATION AND PATIENT USE
1. Fold the two Leaf halves together by pushing together the
tiny protruding knob into the opposing holes at the Leaf
base. Insert the larger knob into the opposing hole at the
Leaf tip. Squeeze the two halves of the Leaf together to
ensure each side securely attaches to the other. Attach
the Leaf to the “U-shaped Connector” on the Short Hose
(8” Quick Disconnect Hose) with the Calculus portal (lower
suction hole) facing away from the hose. Ensure the Leaf
is securely attached.
2. Attach the free end of the Short Hose to the Quick-Discon-
nect Adapter on the Long Hose (48" HVE Attachment Hose).
Insert the coupler at the other end of the Long Hose securely
into an open HVE port. It may be necessary to wet the O-ring
inside the unused port for the adapter to slide in easily.
3. Place ReLeaf into the patient’s oral cavity with the
Leaf positioned between the teeth and cheek and the
Calculus portal (lower suction hole) facing towards the
patient’s teeth
4. When transitioning between patients, a cleaned and
sterilized U-Shaped Connector and Short Hose must be
utilized prior to attaching a new Leaf.
PRODUCT DESCRIPTION/INTENDED USE
Ivory ReLeaf is a hands free, high volume dental suction device that assists practitioners with
evacuation, isolation, retraction and maintaining a dry field during general dentistry, restorative
and hygiene procedures.
ReLeaf is for clinical use by dental professionals.
The Leaf Mouthpiece is composed of a soft, flexible thermoplastic elastomer that is 100% BPA
and latex free. No health hazards have been identified with the use of this material.
The ReLeaf Hoses are composed of a silicone rubber (silicone and silicon dioxide).
1
2
U-shaped Connector
Leaf Mouthpiece
Short Hose (8" Quick Disconnect Hose)
Quick-Disconnect Adapter
Coupler
Long Hose (48" HVE Hose)
