12
Guidelines for installation: (Refer to Section 6 for insert diagrams)
1.
Make sure the damper is secured in the full open position or removed prior to installation.
2.
Install approved (U.L. 1777) fireplace liner
3.
Protect the hearth by covering it with a small rug or utility blanket.
4.
If using the ½” leveling bolts provided in the surround kit, screw these in completely
before installing the stove.
5.
Set the insert on the hearth using a dolly. Make sure the dolly is rated to carry at least 515
lbs, and has a strap to secure the stove to the dolly.
6.
Insert the unit ½ way into the fireplace then use a roller or unscrew the leveling bolts to
level the stove.
7.
Carefully slide the insert all the way to the back wall of the fireplace. Make sure you do
not bend the leveling bolts while sliding the stove. You can cut and place sheet metal in
the bottom of the fireplace to help the insert slide in easily.
8.
Connect the Chimney liner.
9.
Install the Fireplace surround according to the supplied instructions.
