![background image](http://html.mh-extra.com/html/kummert/profi-hd/profi-hd_instruction-manual_2009786032.webp)
32
EN
2
Usually the device is connected to
a camera or a crawler via a reel or a
cable drum. For this purpose, the reel
is mounted to the device and then
connected via a plug. The cable drum
can be hooked onto the device for
transportation. During operation the
cable reel is not attached to the device
and is connected via a cable.
The device is compatible with all digital
reels and cable drums from Kummert
GmbH. Most analog reels and cable
drums can be connected to the device
using an adapter (available as an option).
Lift the reel. Position the reel hooks by
the supporting arm onto the reel beam
of the device. Make sure that the outer
supporting arm is positioned completely
on the outside of the reel beam.
Reel
Open the monitor cover. Hold firmly the
Tab with one hand. Loosen the locking
pin by pulling it outwards and hold it
firmly. Move the Tab to the desired
position. Release the pin. If necessary,
move the Tab until the pin engages and
only then release the Tab.
Preparation for operation with a reel or a cable drum