Your KT-X should have sprung to life at this point. If not, go back and assess the following:
1.
The robot is turned on.
2.
Both the battery on the robot and inside the controller is fully charged.
3.
The upload to the robot’s CPU was successful.
Default Gamepad configurations:
Activate and switch between modes by pressing one of the four buttons while holding down the “select”
button.
Rotary Switch Position “0”
Digital Action Mode
Hold down select and press the button as shown above to activate digital action mode.
0
1
1
Greeting
Canon
Intro
dance
Push inward to raise from
a face down position
Push inward to raise from
a face up position
Action Mode
Walk forward
Walk backward
Turn left
Turn Right
Technique:
try pushing
R2 while
holding
down the
canon
button
Summary of Contents for KT-X
Page 1: ......
