13
fer the network information from the Central Home Unit to a different
device put the Home Control Unit into Initiate mode as described in
6.2.3.13.5 and then put the other devices into Inclusion mode.
Controller replication (copy) is achieved through Inclusion and Initi-
ate. To replicate a controller start Learn mode on the other device.
then put the Central Home Unit into Inclusion mode as described in
chapter 6.2.3.13.1 by clicking on Add device.
Additionally it also supports Update Node and Update Network. The
Central Home Unit discovers a Z-Wave node’s capabilities during
inclusion through a series of comprehensive queries. This process
may take some time, especially for a secure Frequently Listening
Routing Slave (FLIRs) device. This operation may be aborted at any
time. Node Update re-queries the information that was obtained dur-
ing inclusion. This allows discovering any changes that were not
made by the Central Home Unit. Network Update requests topology
from an SUC if available, and then performs neighbor update if
available or node update to every node it is aware of.
5.4 Command Classes
For more information about the Command Class please take a look
at our Command Class Documentation.
5.4.1 Control
The Central Home Unit is able to control/monitor Z-Wave-certified
devices of different categories from various vendors through their
CCs. CCs that are automatically handled are not exposed to the
user. Central Home Unit controls the following CCs and versions:
Table 1: Controlled Z-Wave CCs
CC
Ver CC
Ver
ALARM_SENSOR
1
NW_MGMT_INCLUSION
3
APPLICATION_STATUS
1
NW_MGMT_PROXY
2
Summary of Contents for Central Home Unit
