8
9
KSI-2537
• The iron is not to be used if it has
been dropped, if there are visible
signs of damage or if it is leaking.
• Keep the iron and its cord out of
reach of children less than 8 ye-
ars of age when it is energized or
cooling down.
2. UTILIZATION
AND FUNCTIONING
2.1. Setting the Temperature
*
Synthetics ~silk
**
Wool
***
Cotton ~Linen
1.
Stand the iron upright
2.
Set temperature control to ironing temperature.
3.
Insert the main plug into the main supply.
4.
After the indicator light has gone out and come on again, you may
start ironing. The indicator light will go out from time to time during
ironing.
2.2. Filling With Water
• Ensure the iron is disconnected from the power supply.
• Turn the steam control knob to position “0”
• Fill with water through water filling inlet. (Do not exceed main level
mark on the water tank.)
2.3. Steam-Ironing
Set the temperature control to position
*
for moderate steam and to
***
for maximum steam. With conventional steam irons, water may
leak from the soleplate if a too low temperature has been selected.
Ensure that there is enough water in the water reservoir.
• Stand the iron on its heel.
• Insert the main plug into the wall socket.
• Wait a little while for the indicator light to go out and come on again.
• See the variable steam knob to adjust the steam.
2.4. Burst of Steam
• By pressing button an intense “Burst” of steam is emitted from the
soleplate.
• To prevent water leaking from the soleplate, do not keep the steam
control button depressed for more than 5 seconds.
2.5. Vertical Steam
The appliance is capable of generating steam even when in the
vertical position. This function is especially useful for refreshing
clothes and curtains.
EN
steam iron
