10
11
2. OPERATING INSTRUCTIONS
2.1. First Use of the Machine
Before using the machine for the first time, water should be boiled in
it twice without any additives.
1.
Place the machine on a flat surface.
2.
Fill the kettle with water. Do not overfill! Use the water level
indicator.
3.
Place the kettle flush on the base.
4.
Electrical connection
• Check whether the electrical voltage that you intend to use is
the same as that of the machine. Details are to be found on the
label on the base.
• Only connect the machine to a properly installed 220-240V~
50/60Hz safety socket.
5.
Switch the machine to position 1. The control lamp on the water
level indicator shows that the water is being boiled.
6.
After boiling the machine switches off automatically. Disconnect
the machine from the mains electricity supply. Do not press the lid
up when pouring
3. AFTERMARKET
KUNFT has designed this appliance in order to guarantee the
maximum reliability. However, if a problem occurs, by following the
procedures suggested in this section you may be able to determine
its cause.
Do not attempt to open the appliance – there is a risk of electrical
shock.
If you are not able to solve the problem, please contact your seller
or manufacturer.
All users must be familiarized with this section. Knowing what could
go wrong can help you avoid the occurrence of problems.
WARNING:
any attempt of fixing the appliance without contacting the
manufacturer will nullify the warranty.
In case the problem persists, take your appliance to an aftermarket
section of any Worten, Modelo or Continente store in order to solve
the problem.
Worten Equipamentos para o Lar ensures for a period of 2 years,
counting from the date of purchase of this appliance, a warranty
against any found manufacturing defect. The warranty supposes a
correct use and maintenance of the appliance, namely according
to the instructions expressed in this manual. In case otherwise
identified, the malfunctions will not be under the warranty.
The repairing of electrical appliances must only be made by qualified
technicians, as otherwise there may occur future complications on
the appliances.
To avoid unnecessary risks, in case there are any malfunctions on
the wires or on another type of components, repairing must be made
on the specialized locations of technical assistance, as appropriate
tools are needed.
4. ENVIRONMENT
CONSERVATION
Aiming to protect the environment, we try to reduce to a
maximum the volume of the packages which are confined
to three easy separation materials: cardboard, paper and
plastic.
The appliance is made of recyclable material, once
disassembled by a specialized company. Follow the local
legislation concerning recycling of all materials.
Figure 1
Figure 2
Figure 3
Figure 4
Figure 5
2.2. Cleaning
Always remove the plug from the mains supply before cleaning the
machine!
The exterior of the machine should be cleaned, if necessary, with a
slightly damp cloth without additives.
The calcium filter can be removed for cleaning.
water kettle
EN