Bona
®
CombiEdge™ Short/Long Manual
17
Switching the Baseplate
1.
With a screwdriver, remove
the screws
(A)
that secure
the belt safety plate
(B)
to the
baseplate
(C)
.
2.
Loosen the other screws
(A)
using a 5mm Allen key.
3.
Release the belt by turning
the knob
(A)
manually.
4.
Once the knob has been
removed from its housing,
slide the baseplate to the
side
(A)
, free the belt from the
pulley
(B)
, and remove the
baseplate
(C)
.
To switch the baseplate from short to long, proceed as follows:
5.
Position the long baseplate
(A)
and fit the belt
(B)
into the
pulley housing
(C)
.
6.
Position the knob
(A)
in its
housing and tighten it to
increase belt tension.
7.
Check that the belt has the
correct tension.
8.
Replace the screws
(A)
using
a 5mm Allen key.
9.
Reposition the belt safety
plate
(A)
on the base plate
(B)
and secure it with the screws
(C)
, starting with the center
screw.
