Bona
®
CombiEdge™ Short/Long Manual
7
Safe and correct use
Instructions for electrical connection
This instruction manual should be read carefully before
using the Bona® CombiEdge™ Short/Long wood floor
sanders for the first time.
The instruction manual contains important information on
safety and preventing improper use of the machine and
will resolve any doubts or questions, making it possible to
operate the machine safely and with ease. Removing safety
features could cause death or physical injury. Familiarize
yourself with the machine before using it for the first time.
The Bona® CombiEdge™ Short/Long edge sanders are
designed for the dry sanding of wood floors. Any other use
without the consent of the manufacturer is prohibited. DO NOT
use on wet floors.
See ‘Prohibited use’ on page 11.
Keep hands and clothing away from moving mechanical parts.
The work area is protected by the base frame.
Machine data plate
The following information can be found on the
machine data plate:
1) Machine model
2) Safety symbols
3) Motor power
4) Frequency
5) Supply voltage
6) Country of manufacture
7) Year of manufacture (see 8)
8) Name of the manufacturer
Transporting and Handling
Introduction
Commencing Operation
Ensure the power supply cable is disconnected from
the mains and the machine.
1.
2.
Always move the sanding machine using two handles with the
bag support turned upwards. Protect the sanding disc with an
abrasive disc and ensure the screws fastening the abrasive disc
are secured well. When transporting the sanding machine on a
vehicle always ensure it is well secured and cannot move.
If a situation arises which has not
been described in this manual, contact yo
ur
distributor or Bona
®
Representative.
This machine only operates with the voltage and frequency shown on the machine data plate.
Before connecting the cable to the power supply ensure the correct voltage and frequency are
available.
DO NOT expose the machine to rain. This machine is intended for dry use only.
Keep the machine in a dry building and DO NOT use it in damp or wet places.
9) Serial number:
• The first two numbers refer to the year of
manufacture (14 = 2014)
• The second group of three numbers
indicates the day of the year the machine was
manufactured (174 = June 23rd)
• The last two numbers indicate the progressive
number of machines produced that day of
manufacture
(12 = 12th machine produced that day)
