Bona Dual Edge Manual
12
Prevention Measures for Users (Cont.)
Compliance with safety measures and warnings (cont.)
Injury or damage may occur if maintenance operations or repairs
are carried out by any unauthorized personnel.
The machine may become damaged if it is not kept in a dry
building. Keep in a dry building.
Failure to comply with instructions on this machine and in this
manual may cause serious injury and/or damage. Read and
comply with all safety instructions. Ensure that all plates, labels,
warnings and instructions are secured to the machine. New
plates can be obtained from an authorized Bona dealer.
Instructions on Correct Machine Use
1) Keep hands and clothes away from rotating parts.
2) Keep hands on the handle when the motor is operating.
3) DO NOT leave the machine unattended when the motor is
operating.
4) Always use the machine with the dust bag in the correct
position.
5) DO NOT detach the dust bag when the motor is operating.
6) Always disconnect the power supply cable from the
machine before performing maintenance.
7) Transport the machine with care.
8) Always use the machine in well-ventilated areas.
9) Always keep the work area well-lit.
10) Always dispose of the sawdust appropriately.
11) Use the type and amount of abrasive specified in the
instruction manual.
12) The use of accessories other than those recommended in
this manual may cause injury.
13) The machine is for indoor use only.
Read this manual carefully and become familiar with
the machine.
The equipment is suitable for industrial use (e.g. in hotels,
schools, hospitals, o ices, factories and shops).
The following information highlights particularly hazardous
situations for the operator and/or machine. Understand when
these conditions may be present. Removing safety features could
cause death or physical injury. Take all steps necessary to instruct
personnel who may use the machine. Report any damage on the
machine or incorrect operation immediately.
