21
Starting the Machine (Cont.)
11)
Check the motor cable is connected to the socket on the
extractor head and handle/motor interconnection cable is
plugged into the socket on the side of the motor box.
12)
Connect the plug to the socket.
13)
Switch on the extractor by pressing the switch on the head
(A)
.
14)
Stand behind the handle
and
release the drum lifting lever
(B)
by
releasing the red knob
(A)
. Then, start the motor by pressing the
'Start' button
(C)
.
Keep the 'Start' button pressed
(A)
. Move the drum nearer the floor gradually by slowly moving the drum control lever forwards
(B)
.
To sand, proceed as follows:
Sander operation (cont.)