22
bona.com
Bona Scorpion DCS Manual
5)
Disconnect the machine's flexible hose from the outlet on
the trunk.
Vacuum cleaner operation
Suddenly releasing the lever may cause excessively deep furrows on the work surface which may be difficult
to remove with additional sanding.
To stop the machine, engage the drum lifting lever
(A)
and release the start button
(B)
.
Repeat the preceding steps until step 4, then proceed as follows:
Starting the Machine (Cont.)
Sander operation (cont.)
6)
Fit the flexible hose (provided with vacuum kit) by inserting
one end (rigid plastic fitting) into the outlet on the trunk and
the other end (rubber fitting) onto the edge sander
extraction pipe.