10
NEW GOLIA PLUS User Manual_
May 2013 Edition
Recommendations on prevention measures for users
Compliance with safety measures and warnings
HAZARD
The use of this machine with a damaged power supply cable may cause electric shock.
Do not use the machine if the power supply cable is damaged. Do not use the electric
cable to move the machine.
HAZARD
Injury or damage may occur if the machine runs over the power cable and it becomes
damaged. Keep the cable away from the lower part of the machine to avoid contact
with the abrasive. Always keep the power supply cable raised above the machine.
HAZARD
The moving parts on this machine may cause serious injury and or damage. Keep
hands, feet and loose clothing away from all moving parts of the machine.
HAZARD
Performing maintenance or replacing the dust bag may cause injury to the operator or
people nearby if the machine is connected to the power supply.
WARNING
Failure to comply with instructions on this machine and in this manual may cause
serious injury and/or damage. Read and comply with all safety instructions. Ensure that
all plates, labels, warnings and instructions are secured to the machine. New plates
can be obtained from an authorised
K&T
dealer.
CAUTION
Injury or damage may occur if maintenance operations or repairs are carried out by
unauthorised personnel.
Instructions on correct machine use
Read this manual carefully and become familiar with the machine.
The equipment is suitable for industrial use e.g. in hotels, schools, hospitals, offices, factories and shops.
The following information highlights particularly hazardous situations for the operator and/or machine.
Understand when these conditions may be present.
Removing safety features could cause death or physical injury.
Take all steps necessary to instruct personnel who may use the machine.
Report any damage on the machine or incorrect operation immediately.
1. Keep hands and clothes away from rotating parts.
2. Keep hands on the handle when the motor is operating.
3. Do not leave the machine unattended when the motor is operating.
4. When dry sanding on surfaces generating residual dust use the machine with the dust bag in the correct
position or with a remote suction system.
5. Always disconnect the power supply cable from the machine before performing maintenance.
6. Transport the machine with care due to the heavy weight of the individual parts making up the machine.
7. Always use the machine in well-ventilated areas.
8. Always dispose of the sawdust appropriately.
9. Use the type and amount of discs and abrasive specified in the instruction manual.
10. Always keep the work area well-lit.
11. The use of accessories other than those specifically recommended by K&T in this manual may cause
injury.
12. The machine is for indoor use only.
