6
NEW GOLIA PLUS User Manual_
May 2013 Edition
Transporting and handling the machine
WARNING
Due to the weight of the machine the handle and any accessories should be removed
before it is transported. Request assistance to lift the machine.
Transport with one person
The machine can be dismantled into two parts to facilitate transportation:
Handle Motor
unit
Proceed as follows:
1. Ensure the power supply cable is disconnected from the mains
and the machine.
2. Disconnect the power supply cable and any suction cables
from the lower part of the machine body at the back.
3. Hold the handle firmly in
a vertical position.
4. Loosen the 4 VTCEI M8x30 screws
under the base frame to release the
handle support from the base, which
can then be transported separately.
5. Lift the body of the machine
(bending at the knees) by
clasping the machine under the
frame at the back and front,
using the transportation handle
on the front for assistance.
Transport with two people
1. An operator positioned behind the
machine should grasp the handle grips.
2. A second operator positioned at the front should lift
the machine using the black handle.
