11
VEGA User Manual_
March 2013 Edition
Machine warnings
Prohibited use
WARNING
This equipment is not to be used by anyone (children included) with physical or mental disabilities, or anyone
without the relevant experience and knowledge, unless they have received instructions on using the
equipment and are supervised by a responsible person to ensure their safety.
BEWARE
This equipment is not suitable for collecting hazardous dust.
CAUTION
Using the machine to move objects or moving on an incline may cause injury or
damage. The machine must only be used to sand dry wooden floors which are level or
have a maximum incline of 2%. Do not use the machine to sand steps or furniture. Do
not sit astride the machine when it is operating.
CAUTION
Work surfaces may be seriously damaged if the machine is left turning on one point
while the tool is in contact with the surface. To avoid damaging the surface approach
the cutting line carefully. Do not stop when lowering and raising the equipment, keep
moving at constant speed.
Starting the machine
To start the machine proceed as follows:
1.
Become familiar with the machine and read all instructions and safety notices. Ensure
that all operators have read this manual.
2. Bring the machine to the place of work.
3. Place the dust bag on the pipe by tying the cord
over the pipe flange.
4. Fit the disc in accordance with the ABRASIVE ASSEMBLY PROCEDURES (pg. 13).
WARNING
Only use discs with a diameter of 178 mm.
