14
VEGA User Manual_
March 2013 Edition
Machine adjustment procedures
Adjusting the working surface on the floor
.
The abrasive disc holder
P
fig. 1) has
a truncated cone shape with a large
opening. For the disc to work on the
flat its axis must be tilted with respect
to the floor.
.
The tilt is determined by the position of the
wheels fitted on support
S
sliding along a guide
which can be locked using knob
M.
Loosening
the knob lowers the wheel-holder support to
the required position.
Adjusting the handles
To move the handle to the most
comfortable and effective position
loosen screws
V
, and raise/lower
(max. displacement 120 mm) and turn
(max. displacement 360°) the handle
until the required position is reached.
Then tighten screws V.