5
VEGA User Manual_
March 2013 Edition
Storage
It is advisable to store the machine in its original packaging. Doing so makes it possible to form a column of three
packages maximum, with one on top of the other.
If the machine is removed from the original packaging and is not used for some time ensure the wheels and drum
are not in contact with the ground. In this case use two supports at least 20mm in height to rest the machine on,
ensuring contact is with the base frame.
ATTENTION
This equipment is for dry use only and must not be used or kept outside in wet conditions. Store the machine
in a dry building, otherwise the machine could be damaged.
Storage temperature from -20°C to 50°C.
Transporting and handling the machine
1. Ensure the power supply cable is disconnected
from the mains and the machine.
2. Always move the sanding machine using the two handles with the bag support turned upwards. Protect
the sanding disc with an abrasive disc and ensure the screws fastening the abrasive disc are secured
well. When transporting the sanding machine on a vehicle always ensure it is well-secured and cannot
move. Always lift and move the machine with care, as it is very heavy.
Introduction
Information on safe use
This instruction manual should be read carefully before using the VEGA wood flooring sander for the first time.
The instruction manual contains important information on safety and preventing improper use of the machine and
will resolve any doubts or questions, making it possible to operate the machine safely and with ease.
Removing safety features could cause death or physical injury.
Familiarise yourself with the machine before using it for the first time.
If a situation arises which has not been described in this manual contact your retailer or Kunzle & Tasin s.r.l.
Correct use
The VEGA edge sander is designed to dry sand wooden floors. Any other use without the consent of the
manufacturer is prohibited.
Do not use on wet floors.
See also Prohibited Use on page
11
.
Keep hands and clothing away from moving mechanical parts.
The work area is protected via the base frame.
