18
TECHNICAL PASSPORT
ENGLISH
Cooker hood
1.5
Considering the type of instal-
lation above a kitchen range, two opera-
tion modes can be selected:
Â
air exhaust with corrugated alu-
minium/plastic air ducts
(Ø 150 mm or
120 mm) into a stationary kitchen air
shaft (chimney) (see section 5 );
Â
recirculation (closed-loop kitch-
en air circulation) when a cooker hood
is not connected to a chimney; air is
forced through an aluminium grease
filter (supplied with the hood) and a op
-
tional odor-absorbing carbon filter and,
finally, returns to a kitchen
(Fig. 2).
1.6
CAUTION! Before installing
a cooker hood connect it to the mains
power supply and check all its functions
to ensure technical serviceability.
1.7 We recommend that all work
on the installation, connection and re-
pair of your cooker hood be performed
only by qualified specialists who are
professionally engaged in such work.
1.8 The manufacturer is not re-
sponsible for any failure or damage
caused by improper installation, opera-
tion or repair.
1.9 The manufacturer reserves the
right to make changes in design of the
appliance in order to improve its quality
and performance.
1.10 See technical specifications in
the User Manual and on the label locat-
ed on an interior surface of the cooker
hood
(remove filters to access).
1.11 CAUTION! Install the cooker
hood on a wall at 650-750 mm above
an electric stove. As for a gas stove,
install the appliance at 750-850 mm
above a cooktop (Fig. 1).
