8
TEchnical passporT
English
refrigerator nrs 1857
6. CONTROL TYPES AND USE
6.1. CONTROL PANEL
ON / OFF
FRIDGE DISPLAY
FREEZER DISPLAY
FRIDGE COMPARTMENT
POWER SWITCH (ON/OFF)
FRIDGE TEMPERATURE
ADJUSTMENT FRIDGE
DOOR OPEN ALARM
(DEACTIVATION)
FREEZER TEMPERATURE
ADJUSTMENT FREEZER
DOOR OPEN ALARM
(DEACTIVATION)
HOLIDAY FUNCTION
SUPER FUNCTION
PRE-ALARM - ALARM FREEZ-
ER TEMPERATURE
CAUTION
Whenever the product has been
lying horizontally during transportation,
it should be left to stand upright for at
least six hours before it is switched on,
otherwise it may be noisy when it is in
operation.
SWITCHING ON THE APPLIANCE
The appliance is switched on by
touching the
symbol for at least 0.5
seconds.
It is possible to switch off only the
refrigerator compartment by touching
the symbol for 4 seconds (the «--»
symbol appears on the display);
the freezer compartment may be
switched off by touching the symbol
or at least 4 seconds.
NOTE
Before plugging the appliance
in, make sure that the power supply
voltage corresponds to the value shown
on the product data plate (“See the
section Electrical connection”). Plug
the appliance into the electricity mains
supply. The display will fl ash, showing
the default temperature set by the
manufacturer (7°C for the refrigerator
area, -16°C for the freezer area).
SETTING THE TEMPERATRE
OF THE FREEZER AREA
The freezer display indicates the
actual internal temperature of the
freezer compartment ranging from
+20°C to -40°C; if the temperature ex-
ceeds +20°C, the symbol «H» appears
on freezer display. Freezer tempera-
ture can be adjusted by touching the
symbol; temperatures between -16°C
and -24°C can be set. When the refrig-
erator is switched on, if you touch the
symbol the set temperature value will
fl ash on the display for 6 seconds. To
set a new temperature, touch the sym-
bol and, while the display is fl ashing,
touch the same symbol repeatedly until
the desired temperature value has been
reached; the new setting will be stored
after the display has stopped fl ashing
(6 seconds).