EKE 605.2F / 905.2F
19
Installation of glass-ceramic cooking areas
■
Always lift the cooking area by holding it at the sides. Do not lift it by the
front bar.
■
Be extremely careful when installing! Do not place or drop any sharp or
pointed tools (screwdrivers etc.) on the glass surface!
■
The glass-ceramic cooking area must have a level and flush bearing. Any
distortion may lead to fracture of the glass panel.
– First of all make a clean cut into the worktop.
– Install the mounting panel in accordance with the illustration.
– Stick on the enclosed sealing for the hob and check to see that it is posi-
tioned correctly and adheres perfectly.
If the worktops are uneven (tiles, etc.) do not use the sealing enclosed. Ap-
ply a sealing compound which is unaffected by changes in temperature.
– Put the hob into the worktop cut-out and align it.
– Screw the hob to the assembly panel from the bottom.
Minimum distance to adjacent walls
Cut-out dimensions
Exterior hob dimensions
All manuals and user guides at all-guides.com
