background image

USE

17

t

Cleaning the interior 

Before using the appliance for the first time, wash the
interior and all internal accessories with lukewarm
water and some neutral soap so as to remove the
typical smell of a brand-new product, then dry
thoroughly.

Do not use detergents or abrasive powders,
as these will damage the finish.

The freezer is marked with the

symbol, which means that the compartment is suitable for freezing

fresie food and long-term storage of frozen food.

Control panel

Fast freeze switch

Fast freeze light (yellow)

Warning light (red)

Pilot light (green)

Thermostat control knob

1

2

3

4

5

6

➂ ➃

Starting up

Insert the plug into the wall socket. Turn the
thermostat control knob 

clockwise beyond position

«O» (OFF). The pilot light 

will light up to show that

the appliance is on.
Freezer operation can be halted by turning knob 

to position «O».

Temperature control

Turn knob 

beyond the «O» position until its pointer

coincides with the required setting.
To safely store frozen and deep-frozen foods, the
inner temperature of the freezer must be at least 
-18°C or colder. 
A medium setting is generally the most suitable.

The minimum setting (least cold) is represented by
the lowest number and the maximum setting (coldest)
by the highest number.

The thermostat knob setting should be adjusted
depending on the inner temperature of the appliance,
which, in turn, depends on a number of factors, such
as:

the ambient temperature

the number of times the door is opened

the quantity of food stored

the location of the appliance.

Summary of Contents for FTE 127-6













Reviews: