19
GB
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
•
Press
and hold the button
T4
for at least 10 seconds,until the Leds start to flash.Note the
number of flashes:
•
2 flashes of the LED Activated charcoal filter saturation alarm
ENABLED
•
1 flash of the LED Activated charcoal filter saturation alarm
DISABLED
• Resetting the alarm signal
To turn the alarm signal off, proceed as follows:
•
Press
the button
T4
for at least 3 seconds, until the Leds flash in confirmation. In any
case the saturated filters alarm will only come into operation when the suction motor is
turned on.
ATTENTION - There could be a possible fire hazard if the filters are not replaced
according to these instructions.
Lighting
Version with halogen spotlights:
90 and 120 cm model, four 20W halogen spotlights.
• To replace (
fig.11
)
Remove the two screws fixing the metal ring, extract the spotlight from the lamp holder
by pulling gently. When replacing the spotlight, make sure that the two pins are correctly
inserted in the housing on the lamp holder.
Cleaning
When cleaning the hood:
- Never use a wet cloth or sponge, or running water.
- Never use thinners or products containing alcohol, as they might damage the paintwork.
- Never use abrasive cleaning materials, in particular when cleaning stainless steel surfaces.
It is recommended to use a damp cloth and mild liquid household cleaner.
All manuals and user guides at all-guides.com
