Dimmer function
The display will show two horizontal bars for approx. 5 seconds without a
break as soon as this symbol is touched (Fig. A). When the symbol is touched
again the display will show the level of brightness. The lamp is pre-set at
brightness level “9” in the factory. Touching the “+” and “-” keys will set the
brightness level of your choice. Press the “lamp” symbol once again to save
this setting.
Fig. A
Deleting the filter chan
ge display “C”
When the letter
“C” is shown in the LED display, the charcoal filter will need to
be replaced (see also the section on “maintenance, cleaning and care”).
Hold the on/off key for approx. 5 seconds to reset the display. The function is
reset
and the letter “C” will be deleted from the display.
31